Size: OAL 1995mm x R 635mm x W 695mm x T-T 1270mm

Tyre Size: 12/80R22.5|295/80R22.5|305/70R22.5

The post Mudwing Thermoplastic Mudguards > 50695-ADJ appeared first on Featherwing.

Size: OAL 1890mm x R 635mm x W 420mm x T-T 1270mm

Tyre Size: 11R20|11R22|11R24.5|12.5R20|12/80R22.5|14.5R24|14/80R20|15R22.5|285/75R24.5|295/80R22.5|305/75R24|365/80R20|365/80R22.5|375/70R22.5|375/75R20|385/65R22.5

The post Mudwing Thermoplastic Mudguards > 50420i-ADJ appeared first on Featherwing.

Size: OAL 1890mm x R 635mm x W 420mm x T-T 1270mm

Tyre Size: 11R20|11R22|11R24.5|12.5R20|12/80R22.5|14.5R24|14/80R20|15R22.5|285/75R24.5|295/80R22.5|305/75R24|365/80R20|365/80R22.5|375/70R22.5|375/75R20|385/65R22.5

The post Mudwing Thermoplastic Mudguards > 50420i appeared first on Featherwing.

High quality, heavy-duty mudguard
Mudguard body manufactured from galvanised steel
Fitted with impact resistant rubber edge
Rubber edge secured to wing with a through wire fixing rod
Replacement rods and edges available
Other sizes available on request
Size: OAL 2135mm x R 675mm x W 650mm

Tyre Size: 1.00x20|12/70R22.5|12/80R20|12R22.5|275/80R22.5|295/80R22.5|305/70R22.5|315/70R22.5

The post Steel Mudguard Rubber Edged 50BR appeared first on Featherwing.

Rolled from plain finished aluminum
Meets the requirement of WFR TP002 - suitable for vehicles conforming to Petroleum Regulations
Available in a range of standard sizes, or bespoke to your requirements
Bespoke Sizes - please note the minimum width of mudguard is 250mm and the minimum radius we can offer is 360mm
Size: OAL 2135mm x R 660mm x W 650mm

Tyre Size: 12/70R22.5|12/80R20|275/80R22.5|295/80R22.5|305/70R22.5|315/70R22.5

The post Aluminium Plain Mudguard 50B-ALU appeared first on Featherwing.

All mudguards are manufactured from 1mm mild steel (as standard)
Available in galvanised or zintec steel on request
Bespoke sizes available on request
Fully wired edges for stability
Size: OAL 1980mm x R 635mm x W 330mm

Tyre Size: 11R20|12R22.5|13R22.5|295/80R22.5|305/75R22.5|315/70R22.5|315/75R22.5|335/80R20|8R19.5

The post Steel Mudguard 21 appeared first on Featherwing.

Product Information:
Thermoplastic Curve Section
Alu-zinc Centre Section
Curves Supplied in Black as Standard
Coloured Curves on request
End curves fitted with reflector (Material used ECE 104 compliant)

Size: W695 x R650 x AC1360mm

Tyre Sizes: 12.00R24, 295/80R22.5, 315/80R22.5

The post Thermoplastic Mudguard Tri/Tandem 3 Part Sectional ST695N-IT-ALU-ZINC appeared first on Featherwing.

Size: W650mm x (R1)650mm x (R2)570mm x OAL2400mm x F350mm x H680mm

Tyre Size: 11R22.5, 12R22.5, 275/80R22.5, 295/80R22.5

Product Information:
Specially designed for use on steering axles
The best visual and technical results are attained using the mudguard with the IT bracket, however conventional fixings can be used if required
Excellent cold crack, impact, and chemical resistance
Packed in a protective polythene sleeve
Unique styling – advanced design
Lightweight
Reflectors fitted within each mudguard

The post Thermoplastic Mudguard Steering Axle IT650SFT appeared first on Featherwing.

Product Information:
Flat Top design for fixing directly to vehicle body
Unique styling – advanced design
Lightweight
UV stability package on all mudguards
Reflectors fitted within each mudguard
Resistance to most chemicals
Excellent impact and cold crack resistance
Available in Black and over 60 Fleet Colours

Size: W650mm x H715mm x T-T1320mm x F750mm

Tyre Size: 11R22.5|12R22.5|295/80R22.5

The post Thermoplastic Mudguards > Mudguard Flat Top IT650FT appeared first on Featherwing.

Size: OAL 2400mm x R 650mm x W 650mm

Tyre Size: 11R22.5|12R22.5|275/80R22.5|295/80R22.5

The post Adjustable Thermoplastic Mudguard Steering Axle > IT650SFT-ADJ appeared first on Featherwing.